FS Ceramic Fiber Modules High Temperature 1260 Thermal Insulation Materials
Product Description
Ceramic Fiber Modules including unifelt, uni-
module and folded module, are made by folding and pre-cutting
WEIYE ceramic fiber blanket, relevant temperature stainless steel
anchors are installed into the modules in advance, easy to install
and convenient to repair old kilns .
Characteristics
* Low density, low thermal conductivity
* Excellent thermal resistance to shock
* Resistance to air eroding
* Excellent mechanical strength
* Good safety with anchor inside
* Easy to install
Typical Application
* Ceramics:shuttle kilns,tunnel kilns,kiln car etc
* Steel:heater,continuous annealing furnace,galvanizing line,kiln car etc
* Heat treating:annealing furnace,normalizing furnace,kiln car etc
* Petrol-chemical:cracking heater,reformer,gas flue etc
Technical data of ceramic fiber module
| Product item | Common | Standard | High purity | High alumina | High zirconium |
| Classification tem (℃) | 1160 | 1260 | 1260 | 1360 | 1400 |
| Working tem (℃) | <1000 | 1000 | 1100 | 1200 | 1350 |
| Density (kg/m3) | 190-220 |
| AL2O3 | 44-45% | 46% | 47-49% | 52-55% | 39-40% |
| ZrO2 | - | - | - | - | 15-17% |
| AL2O3+SiO2 | 96% | 97% | 99% | 99% | - |
| AL2O3+SiO2+ZrO2 | - | - | - | - | ≥99% |
| Fe2O3 | ≤1.2% | 0.2% | 0.2% | 0.2% | 0.2% |
| Na2O+K2O | ≤0.5% | 0.2% | 0.2% | 0.2% | 0.2% |
| Size(mm) | 600×300×100/200(no anchoring-structure). 300×300×200/250mm (anchoring-structure). Anchoring parts: SS304, SS310. Customized according to customer's drawings. |
